LATEST DEALS FROM OUR SPONSORS

CHEAPEST WORK MEISTER, VSKF, VS-XX, SSR TYPE F SPECIALS - BACK BY POPULAR DEMAND - UNBEATABLE PRICE - TILL END OF MAY

Sun, 13 May 2012 14:54:09 +0000

As work wheels official work distributor since 2008, you will always get:
1. Factory backing - any defect (which we have not seen even one before!), we will fix it for you
2. Genuine wheels - no fakes
3. Factory technical support / expertise
4. You will always get proper receipt. we are a proper registered australian company with ABN.
5. There is no surprises ever! one price, that is all you need to pay. we take care of everything.

Hei guys,

a few people are asking me if i am going to do any special anymore on meister s13p and vskf in the past months. so i decided to do it that i will put again with whats available from work japan.

again unbeatable price

SOME USEFUL INFOS
1. SPECIAL END 31 MAY 2012
2. Price is pick-up in sydney, no more to pay all taxes paid for. Delivery is extra
3. Lead time will be 10-12 weeks on average to land in sydney.
4. 50% DEPOSIT REQUIRED. Non-refundable once order has been placed. tax invoice will be provided as proof of deposit. the remainder 50% when wheels have landed in sydney
5. Payment is via direct deposit or internet banking. No paypal or credit card. sorry
6. BANKING DETAILS:
Westpac Banking Corporation Australia
Name: JDM CONCEPT
Number: [BSB] 032157 - [A/C no] 199691

7. What is the following disk means?
R disk - if you have brembos calliper. generally if you have GTRs and evos, you will need R disk to clear the caliper.
A disk - means for standard calipers. all silvias can clear this, all non- GTRs skyline can fit this as well
O disk - means deep dish wheels. generally they are used at the rear to gain more dish at the expense of less brake clearance.
O disk in almost all cases cannot be fitted on the front unless you have very small brakes which none of nissans do.
*** please ask if you are unsure what car you need ***

8. as we have limited number of sets, we are happy to give you time to choose your spec even after deposit has been made. you dont need to give the spec right away. i know its a lot of work to work out the spec and i know a lot of people dont want to miss out on this great deal since we have limited number only

OFFSET CALCULATOR:
http://www.jdmconcep...fset-calculator

WORK MEISTER S13P [normally about $3200-3800 a set]
Pictures of wheels on facebook: https://www.facebook...34385749&type=3

Spec sheet: http://www.jdmconcep...f/meister-s1-3p

Colour available:
[SIL] Silver - Standard
[FS2] Fein Heit Silver II - Standard
[BKB] Black burning - Standard
[BLK] Black - Standard
[MBL] Matt Black - Standard
[MHG] Bronze - Standard
[GLD] Gold - Standard
[MGM] Gunmetal - Standard
[BBF] Buffed - $150 additional per wheel - Premium

Wheels available
SET 1 [$2600 pick up] x 2 sets available at the moment
[F] 5-114.3 18inch, R disk, your choice of width, offset and colour
[R] 5-114.3 18inch, R disk, your choice of width, offset and colour

SET 2 [$2600 pick up] x 2 sets available at the moment
[F] 5-114.3 18inch, A disk, your choice of width, offset and colour
[R] 5-114.3 18inch, O disk, your choice of width, offset and colour

SET 3 [$2600 pick up] x 2 sets available at the moment
[F] 5-114.3 18inch, R disk, your choice of width, offset and colour
[R] 5-114.3 18inch, O disk, your choice of width, offset and colour

WORK VS-KF [normally about $3200-3800 a set]
Pictures of wheels on facebook: https://www.facebook...34385749&type=3

Spec sheet: http://www.jdmconcep...u/pdf/vs-kf-set

Colour available:
[FS2] Fein Heit Silver II - Standard
[BKB] Blackburning - Standard
[M] Chrome - $125 additional per wheel - Premium
[SC] Super Chrome - $125 additional per wheel - Premium

SET 1 [$2500 pick up] x 3 sets available at the moment
[F] 5-114.3 18inch, A disk, your choice of width, offset and colour
[R] 5-114.3 18inch, O disk, your choice of width, offset and colour

WORK VS-XX [normally about $3800ish a set]

Spec sheet: http://www.jdmconcep...u/pdf/vs-xx-set

Colour available:
[BS] Burning Silver - Standard
[MBL] Matt Black - Standard
[XG] Gold - Standard
[M] Chrome - $125 additional per wheel - Premium

Wheels available
SET 1 [$2800 pick up] x 2 sets available at the moment
[F] 5-114.3 19inch, R disk, your choice of width, offset and colour
[R] 5-114.3 19inch, O disk, your choice of width, offset and colour

SET 2 [$3000 pick up] x 2 sets available at the moment
[F] 5-114.3 20inch, R disk, your choice of width, offset and colour
[R] 5-114.3 20inch, O disk, your choice of width, offset and colour

WORK S1-R [normally about $3200-3800 a set]

Pictures of wheels on facebook: https://www.facebook...34385749&type=3

Spec sheet: http://www.jdmconcep...meister-s1r-set

SET 1 [$2600 pick up] x 2 sets available at the moment
[F] 5-114.3 18inch, Matt black only, your choice of width, offset and disk
[R] 5-114.3 18inch, Matt black only, your choice of width, offset and disk

SET 2 [$2800 pick up] x 2 sets available at the moment
[F] 5-114.3 19inch, Matt black only, your choice of width, offset and disk
[R] 5-114.3 19inch, Matt black only, your choice of width, offset and disk

SSR TYPE F
http://www.jdmconcep.../ssr/type-f-set

SET 1 [WAS $2480, NOW $2080 save $400! pick up] x 1 set available at the moment
[F] 5-114.3 18x9.5 +22 Flat black
[R] 5-114.3 18x9.5 +22 Flat black

SET 2 [WAS $2920, NOW $2520 save $400! pick up] x 1 set available at the moment
[F] 5-114.3 19x9.5 +22 Flat black
[R] 5-114.3 19x9.5 +22 Flat black

SET 3 [WAS $3000, NOW $2600 save $400! pick up] x 1 set available at the moment
[F] 5-114.3 19x10.5 +15 Flat black
[R] 5-114.3 19x10.5 +15 Flat black

SET 4 [WAS $2960, NOW $2560 save $400! pick up] x 1 set available at the moment
[F] 5-114.3 19x9.5 +22 Flat black
[R] 5-114.3 19x10.5 +15 Flat black

we have other work wheels on special (limited quantity) such as

Gnossis and Schwert series only. sorry no special on any other series or spec other than what is already listed above, please let me know if you are interested.

browse as at: http://www.jdmconcep...m.au/brand/work

NISSAN 180SX TYPE X D-MAX 2-1 FRONT BAR INDICATORS

Sat, 12 May 2012 01:42:39 +0000

Nissan 180sx Type X D-MAX 2-1 Front Bar Indicator Lights.
JSAI now carries 180sx Type X D-Max 2-1 front bar indicator lights for the Nissan 180sx. The lights are sold as a pair and come with LED bulbs and wiring assembly.

The lights are designed to work with your factory indicator and parklight setup. They are simple to install. The lights are perfect for people upgrading to a Type X Front Bar or want to remove the indicator lights from their Factory Type X Front Bar. There is no need to change your factory wiring or bulbs as the lights use the factory plugs and bulbs.

The lights retail for $99.00. Australia-wide registered postage is $9.

Special for Nissansilvia Members - $89.00 with free postage in Australia only.

We ship worldwide, please contact us for postage costs.

Payment details: Cash on pick up, direct deposit or Paypal payments are accepted.

JSAI is located at:
238-258 Captain Cook Drive, Kurnell, NSW.
Monday - Friday 9:30am- 4:30pm
Saturday- by appointment only.
are simple to install, and
For more info or to order please send us a pm, a text message or email.
M: 0405 153 290
Email: josh@jsai.com.au
Web: www.jsai.com.au
Please note, The fibreglass and carbon fibre manufacturing process is a "hands on" process which often prevents us from taking calls during business hours. For this reason it is best to send us a text, pm or email and we will get back to you asap. We make every effort to get back to customers within 24 hours of receiving a message.

Attached Thumbnails

AME TM-02 - Wheels of World Time Attack "As seen on CyberEvo and JET200"

Thu, 10 May 2012 07:19:35 +0000

AME (AUTO MOBILE ENGINEERING)

The AME (Auto Mobile Engineering) brand is developed by Kyoho Corporation and manufactured by Enkei in Japan. AME is considered to be Japan's premier, major luxury wheel brand and is actively involved within the ultra competitive, enthusiast markets.

AME prides itself on offering a complete line of truly high-end, premium aluminum alloy wheels for the different automotive genres including high-end Sports, VIP / Luxury / Euro, and K/Compact car categories.

HISTORY

AME brand was born back in 1981.

In 1986, AME was the first to introduce the 17 inch wheels to the Japanese market. At the time, 17 inch wheels were considered to be the largest wheels in Japan.

In 2000, AME was the first to release the 20 inch multi piece wheels to the world market by introducing the "AME Modelart".

MAJOR ACHIEVEMENT

Spoon Sports USA race cars are running on AME wheels (AME Tracer FS-01) and they have been winning races in USA.

FEEL'S FD2 Type R has become the fastest Front wheel drive car in 2009. FEEL'S FD2 Type R is running on AME TRACER TM-02.

* Their time 1'53.25 @ Fuji Speedway racing course on 12 MAR 09

* This was the "TOP 10" time in Super GT GT300 in 2008

* The Best time for Civic was 1'57.22 ever and Civic in Super Taikyuu was 1' 59.02.

"Prostock Racing" Z33 and Z34 have won the Z Challenge/Z Master 2008&2009 Pole to Win.

*They also "pole to win" @ Nismo festival on 06 DEC 09. Both cars are running on AME TRACER TM-02.

"Cyber EVO" beat HKS and became Fastest Tuning car in 2009. As you know, HKS EVO spec is mostly GT class, Cyber EVO is still a tuning car.

* 17 FEB 09, @ Fuji Speedway Race Course, they record the fastest tuning car time of 1'41.434?

* 09 DEC 09 @ REV ATTACK, they have become number 1.

* Cyber EVO is running on AME TRACER TM-02 Below are some images of AME wheels. Please note all pictures are courtesy of their respective owners.

*Photos shown above are for illustration purposes only
*The wheels shown above is for sizes 18 x 9 +15 to 19 x 10.5 +22

SPECIFICATION:

17 x 9 +22 - $2050/set

18 x 9 +35 - $2350/set

18 x 9 +15 - $2350/set

18 x 9.5 +22 -$2400/set

18 x 10 +15 - $2450/set

18 x 10.5 +22 - $2500/set

18 x 11 +10 - $2800/set

19 x 9.5 +22 - $2900/set

19 x 10.5 +22 - $3000/set

PCD: 5 x 114.3 only

Colour: Dark Gunmetal & Hyper Silver **Hyper silver adds $100/set**

Please contact us on 02 9825 8571 or email sales@autotechnik.com.au if you have any question

ENKEI AND MRR WHEELS MADNESS! ALL NEW XXR530 IS HERE! No one beats our prices!

Thu, 10 May 2012 04:02:17 +0000

ENKEI RPF1 CHEAPEST ON THE MARKET GUARANTEED

Tue, 08 May 2012 02:45:19 +0000

All,

ENKEI RPF1 is known as one of the most affordable japanese manufactured light weight wheels.

As some of you are aware that there are many people buying these wheels from overseas such as USA. One of the reason is because they believe the prices are cheaper than buying locally.

One thing that many people do not realise is that the pricing quoted from overseas sellers do not include GST and duty even though they ship door to door. Many people take shortcut by under declaring the actual value of the product(s) to avoid paying Duty, GST and broker fee.

By under declaring the actual value of the goods, you have put yourself at risks such as:
- The insurance will only cover you for the declared value of the goods.
- There is a big fine imposed by customs for providing false information.

So our aim is to provide the best pricing for Enkei wheels starting with RPF1. We will keep all of the stock here is our Sydney warehouse and all wheels will be shipped from our warehouse. No drop ship!

All our pricing will include GST and no hidden charges.

Here is the comparison of pricing between overseas seller and us.

Pricing from one popular overseas seller for a set of Enkei RPF1 18 x 10.5 Silver shipped is $1459.95 USD + $300 USD shipping. So total is $1759.59 USD or approx $1725 AUD.

However, this price does not include Duty, GST, and broker fee. So the final price will be about $2080 AUD includes Duty, GST and broker fee.

Our price for a set of Enkei RPF1 18 x 10.5 Silver is $1520 includes Duty, GST, & broker fee.

We will also match or beat any genuine quotes from local traders (with ABN) or overseas seller (price should include Duty + GST).

Door to door shipping does not mean that GST + duty has been paid. You will still have to pay duty + GST eventhough the price quoted from overseas sellers include door to door shipping.

Here is the listing of the RPF1 wheels that are arriving at the end of February. Please note: this is not a pre-order. These wheels are coming regardless.

SET 1
F: 17 x 9 +22
R: 17 x 9 +22
Colour: Silver
Price: $1170 Incl GST

SET 2
F: 17 x 9.5 +18
R: 17 x 9.5 +18
Colour: Silver
Price: $1190 incl GST

SET 3
F: 17 x 10 +18
R: 17 x 10 +18
Colour: Silver
Price: $1220 incl GST

SET 4
F: 18 x 9.5 +15
R: 18 x 9.5 +15
Colour: Matte Black
Price: $1525 Incl GST

SET 5
F: 18 x 10.5 +15
R: 18 x 10.5 +15
Colour: Matte Black
Price: $1585 Incl GST

SET 6
F: 18 x 9.5 +15
R: 18 x 9.5 +15
Colour: Silver
Price: $1480 Incl GST

SET 7
F: 18 x 10.5 +15
R: 18 x 10.5 +15
Colour: Silver
Price: $1520 Incl GST

SET 8 - PRE ORDER ONLY
F: 18 x 8.5 +30
R: 18 x 8.5 +30
Colour: Silver
Price: $1330 Incl GST

SET 9 - PRE ORDER ONLY
F: 18 x 8.5 +30
R: 18 x 8.5 +30
Colour: Black
Price: $1395 Incl GST

SET 10 - PRE ORDER ONLY
F: 18 x 9 +35
R: 18 x 9 +35
Colour: Silver
Price: $1440 Incl GST

PACKAGE DEAL

For any purchase of a set of Enkei wheels, you can purchase the package deal which include the following:
- A set of KICS PROJECT LEGGDURA RACING (available in 7 colours). Normal price is $180
- A set of Kyo-ei Metal hub rings. Normal price is $60

Package deal price is $170 which includes the KICS wheel lock nut and Kyoei Hub rings

*Price is for pick up. Please pm or email us on sales@autotechnik.com.au for delivery fee.
*We reserve the right to change the pricing in the future.
*Payment is by direct deposit or fund transfer only. No credit card accepted. Paypal will incur 4% fee

koyo alloy radiator -type R 53mm thick-nissan - subaru - mitsubishi - honda - subaru - toyota

Sat, 05 May 2012 04:01:54 +0000

[attachment=218994:nengun_0...radiator.jpg]
http://www.koyoradracing.com/
kOYO RADIATOR CAP 1.3 SELLING $43+SHIPPING
[attachment=347356:140.jpg]
Koyo Radiators are designed, manufactured and specified to original equipment (OE) specifications. Koyo radiators are renowned for their OE style design made especially for import cars. Koyo's radiators are also available in plastic tank and aluminum core. Our NocolokR brazing line keeps the highest quality standards, bringing you superior products you can rely on. Koyo is Japan's largest aftermarket radiator manufacturer. The Koyo radiator is produced from aircraft quality aluminum and Heli-arc welded. Heli-arc soldering is the highest quality standard for enforcement along aluminum connections.

Product Features:

- Fully polished to a mirror finish (Depending on radiator)
- 30% more cooling than standard radiators
- Handles high revving, high performance motors
- Perfect for Turbocharged, Supercharged & Nitrous Oxide equipped engines - Custom built OEM fit
- All radiator cores and tanks are specifically designed and built for each application.
- No universal fit parts are used. This ensures proper fit, just like your original equipment!

-alloy 53mm thick

we now keep instock

nissan
hh022360-nissan skyline r35 gtr vr38dett (48mm thick) selling $750+shipping
r020214-nissan skyline r32 2.0L/2.5L 1989-96 (53mm thick )selling $665+shipping
r1439-nissan 300zx 3.0 twin turbo 1989-96(53mm thick ) selling $600+shipping
r020252-nissan silvia s13 1991-92 2.0L (53mm thick )selling $499+shipping
r020252n-nissan silvia s13 1991-92 2.0L (53mm thick )selling $559+shipping (n-flow)
r020369-nissan silvia s14/s15 93-00 (53mm thick )selling $499+shipping
r020369n-nissan silvia s14/s15 93-00 (53mm thick )selling $559+shipping (n flow)
r020442-nissan skyline r34gtt 1988-03 selling(53mm thick )$675+shipping
r020442-nissan skyline r33gtst 1993-98 2.5l (53mm thick )selling $675+shipping
R2577 NISSAN 350 Z 03-06 (53MM THICK ) SELLING $660+SHIPPING
R2999 NISSAN 350 Z 07-08 M/T (53MM THICK ) SELLING $660+SHIPPING

mitsubishi
r030561-mit lancer evolution 1/2/3/ 92-96 (53mm thick )selling $649+shipping
r030939-mit lancer evolution 4/5/6/ 96-01 (53mm thick )selling $649+shipping
r2676-mit lancer evolution 7/8/9/ 02-07 (53mm thick )selling $689+shipping
hh032412 mit lancer evolution 7/8/9/ 02-07 (half size race use )selling $590+shipping
v2979 - mit lancer evoluton 10 4b11 cz4a (48mm thick ) selling $695+shipping
mazda
r1443-rx7 series 6/7/8 1992-2002 selling $610+shipping
v2695-rx8 series 04-08 selling $630+shipping
honda
R1570-honda SI 1991-00 (32MM THICK )selling $540+shipping
R2028-honda integra DC 2 (53MM THICK) 1993-99 selling $600+shipping
V2425-honda integra DC5 RSX 02-06 (48MM THICK )selling$620+shipping
R2344-honda s2000 1999-2009 (53MM THICK ) selling$630+shipping

subaru
vh2778-subaru liberty bl5 05-09 turbo m/t (53mm thick )selling $695+shipping
sub0632al-subaru wrx impreza 1993-00(53mm thick ) selling $639+shipping
r2344-subaru wrx gdb impreza 00-02 2.0l (53mm thick ) selling $650+shipping
r2704-subaru wrx gdbb impreza 03-07 2.0l (53mm thick ) selling $650+shipping
vh13093 subaru wrx grb gh8 impreza 08 on ward (48mm thick ) SELLING $695+shipping
VH13026 SUBARU SG5 (48MM THICK ) SELLING $685+SHIPPING
toyota
r1856-toyota supra jza80 1993-98 (53MM THICK ) selling $675+shipping
R0747 TOYOTA AE86 84-87 (53MM THICK ) SELLING $600+SHIPPING
R2358 TOYOTA MRS 2000-2005 (53MM THICK ) SELLING $620+SHIPPING
shipping depend where u are
qld $20 nsw $25 vic $35 wa $45 tas $50 nt $75

we match all price

please pm us

instock

POWERTUNE FUEL RAIL KIT

Thu, 03 May 2012 09:49:23 +0000

POWERTUNE S13 SR20 fuel rail kit
I.D 2000cc
complete kit
comes with every thing you see

$1200

powertune S14 and S15 fuel rail kit
http://www.nissansil...howtopic=475456

ISC Tube and Fin intercooler kits and 52mm Alloy Radiators!

Tue, 01 May 2012 02:43:11 +0000

These aftermarket ISC 52mm dual core radiators are fantastic value for money! They are a direct bolt on replacement for your standard unit and will help to keep your engine temperature at an all time low when driving your vehicle hard whether it be on the street or on the track.

RB20DET = $329
SR20DET S13 = $329
SR20DET S14/S15 = $329
RB25DET = $329
RB26DETT = $329

We have recently introduced this newly designed tube and fin intercooler kits into our large range of products. The intercooler itself is approx 40% lighter then another style of cooler (bar and plate). Each intercooler is polished and pressure tested after manufacturing to assure the highest level of quality for our customers. The core is also desinged with an oval tube to increase air flow and reduce turbulence making the cooling more efficient and better for over all performance.

The intercooler kits include a "tube and fin core" along with polished pipe work, clamps, brackets, silicon hoses, zip ties, washers, nuts, bolts and basically anything else needed for installation.

Kits are available for:

Skyline R32gtst = $499
Skyline R33gtst = $499
Skyline R34gtt = $499
Silvia S13 (sr20det) = $499
Silvia S14 = $499
Silvia S15 = $499

SALE PRICE $399 LIMITED TIME

ISC N1 coilovers reduced to $1199! 32 step damper adjust, base height adjust, 2 way camber adjust, local warranty

Tue, 01 May 2012 02:38:10 +0000

-$1499 PER SET ISC N1 **$1199 (limited time only)

-AUSTRALIAN MADE THRUST KIT ($100-cost price)

-$750 PER PAIR

-$50 PER EXTRA SPRING

-12 MONTHS WARRANTY

-CHOOSE YOUR OWN SPRING RATE AT NO EXTRA COST

-32 STEP DAMPER ADJUST

-HEIGHT ADJUST

-BOUND ADJUST

-CAMBER TOPS

-EXTRA CAMBER ADJUST VIA BOTTOM BRACKET

-NON GENERIC

-AS USED BY AUSTRALIA'S TOP DRIFTERS

RYAN PROBERT-0413804117

VISIT OUR WEBSITE FOR MORE INFORMATION.......ISC WEBSITE

ISC coilovers were first distributed in Australia in early 2006. The coilovers have been sold through out Asia, America and Europe for over 10 years with a very positive response.
Our coilovers are produced at our own workshop by qualified technicians, designers and quality control personnel. Some of the designing is now carried out by our very own team in Australia making the coilovers more suitable for the Australian market.
In 2006 our company supported Danny Vahoumis "the godfather of drift" through sponsorship. Danny proved the durability of our products at the top level of Drift in Australia, collecting podium finishes along the way.
In 2007 ISC supported the Wheelworx 3 car DA team consisting of Tom Monkhouse, Adam May and Linden Reynolds. Once again this demonstrated that our coilovers can perform at the highest level of motorsport, this was evident when Tom Monkhouse finished first at RD3 in Eastern Creek.
Over time our products have become more popular, thus constantly updating our performance range in order to bring you the best quality products at an affordable price.

Currently we are sponsoring Danie Prior in his 1.5JZ S13 silvia, In 2011 Daniel was very consistent qualifying at the top of the field in each round and also finished 2nd and 4th outright in 2 rounds. The silvia currently competes in the SA G1 series but hopefully in the future it will compete in a variety of events around Australia.
Another car we are currently sponsoring is the ISC Time Attack S14, this car has the whole ISC suspension package along with other ISC parts such as radiator, intercooler etc. The car has competed in 5 local Time Attack events finishing 2nd,1st,1st,2nd,2nd in RWD OPEN Class, the car also travelled to Winton for the 2011 SAUNATS and took out 2nd place in open class (first time on the track).

ISC Australia has just released new thrust bearing kits for its range of N1 coilovers.

These kits are manufactured in Australia, using high quality Japanese bearings.

The addition of the bearing kit to your coilovers will add faster and smoother steering response, and allows better spring compression. Another huge bonus is that it takes a lot of stress away from the pillowball giving it a longer life.

Kits are available for purchase with N1 coilovers for an additional $100 (below cost price) or can be purchased seperately for $149 a pair.

Attached Thumbnails

Project Mu - Authorised Dealer! 100% made in Japan brake pads, rotors, calipers + more...

Tue, 01 May 2012 00:42:49 +0000

JDM Obsession Pty Ltd is proud to be an authorised dealer for Project Mu.

For all pricing and availability enquiries, please email SALES@JDMOBSESSION.NET

About Project Mu

Project Mu braking products have been around since 1988. Project Mu aim to create the highest quality braking products for specific vehicles in the street sports and racing category.

All Project Mu products, from the street sports brake pads to race calipers, from handbrake shoes to motorsport pads, are made at Project Mu's factory in Ibaraki, Japan. Project Mu manufacture all their products to strict ISO9001 quality standards, and even have two purpose built brake dyno's for testing, research and development.

Project Mu products are used extensively in motorsports around the world, from drift to time attack, and everything in between. In Australia, Project Mu brake pads are included on the V8 Supercar Championship Series 'control brake list' - with many winning teams using them to give an advantage over the competition. Further, Project Mu pads are used for racing globally including WRC, Nascar, WTCC, WTA, BTCC, ATCM, D1 Drifting, and more!

Product range - Disc Rotors

Project Mu Pure Plus 6
This is a slotted version of the SCR Pure Plus designed primarily for high performance street driving.

Project Mu CRD
The CRD disc is designed to be a cross over from high performance street to track, at a budget price.

Project Mu SCR
The SCR disc is designed to be a cross over from high performance street to track.

Project Mu SCR-Pro
The premium disc in the Project Mu range, the SCR-Pro incorporates all features you will find in a race disc – packaged to fit onto standard cars.

Project Mu SCR-GT
The SCR-GT has all the best features of the SCR-Pro with the addition of a floating hat.

Project Mu Replacement Outers
Replacement Outers for your SCR-Pro or SCR-GT Rotors.

Product range - Brake Pads

Project Mu Bestop
OEM replacement pads designed to offer low noise and dust whilst improving the performance of your road car.

Project Mu Type NS
Type NS are for your street car that gets the odd 'thrashing'. Massive improvement from standard pads with low noise/dust properties.

Project Mu B-Spec
For the sports driver and odd track day enthusiast. B-Spec has more 'bite' than most other street sport pads on todays market and with temperature abilities of up to 500°C.

Project Mu Type HC+
HC+ has awsome anti-fade charecteristics whilst offering excellent performance and driver feel. This pad is for track day, rally, race as well as high performance street.

Project Mu RC09 Club Racer
Developed and refined through our experience in professional motorsport, the RC09 Compound is Project Mu's latest in performance pad technology and is designed for the seriously fast enthusiast.

Project Mu D1 Spec
Made for front-engine/rear-drive and mid-engine/rear-drive vehicles, these rear brake pads are designed exclusively for drifting.

Project Mu Handbrake Shoe
Made for front-engine/rear-drive and mid-engine/rear-drive vehicles, these rear brake pads are designed exclusively for drifting.

For all pricing and availability enquiries, please email SALES@JDMOBSESSION.NET

Silicone Hoses - Straight, Reducers, 45 Deg, 90 Deg, 135 Deg, T-Piece, Clamps, Vacuum Hose

Mon, 30 Apr 2012 04:50:29 +0000

Genuine Nissan Parts! + NISMO Parts!

Sun, 29 Apr 2012 08:19:31 +0000

OVER 50 NEW PARTS NOW IN STOCK!!!!

If you can't find the part your looking for feel free to PM me and we can order it in!

All parts are in stock and ready to ship! (unless stated)

Check out out FEEDBACK here: Link

Click Categories:

NISMO
CA18 PARTS
RB PARTS
SR20 PARTS
DRIVETRAIN
SR20VE PARTS
BODY PARTS
INTERIOR PARTS

NISMO PARTS

Nismo Power Braces

Description:

Box reinforcement of the tension rod bracket has resulted in a system combining the left and right brackets and bar. It provides greater chassis and steering rigidity and improves steering response, creating more stable driving conditions and preventing the change of alignment that can come from lack of rigidity in high-load situations such as circuit racing.

There are no protrusions to the lower, so ground clearance is unchanged (genuine under-cover can be used as is as well). The tension rod bracket which forms the base for reinforcement is the same as the genuine part, so installation points are unchanged. It can be used with NISMO tension rods, or the pillow-type tension rods of other manufacturers as well.

Application: S13, S14 & S15

Price:

S13 $280.00 (order in only, 3-4 week wait)
S14/S15 $275.00 (order in only, 3-4 week wait)

Nismo Engine & Gearbox Mounts

Description:

Nismo mounts are 30-40% stiffer which makes motor shake less at idle and the Nismo transmission mount provides precise shifting at high rpm from reduced motor/transmission movement.

Application: S13/180sx, S14, S15

Price: $350 per set

Or buy separately

$130.00 LH Engine Mount
$130.00 RH Engine Mount
$120.00 Gearbox Mount

Nismo Aluminum Gear Knobs

Description:

Genuine Nismo gear knob. CNC machined from solid aluminum and anodised.

These will fit any nissan with a 10mm Thread. Most 5spd nissan (S13 S14 180sx etc)

Colours: Black

Price: $100.00

Nismo Radiator Caps

Description:

Nismo radiator caps... Higher holding pressure for better cooling. 0.3Mpa (1.3kg/cm2)

Will suit all Nissans

Price: $65.00

Nismo Oil Caps

Description:

Absolute quality genuine Nismo Oil Cap (Type 1).

Note: Beware of cheap imitations. This is the genuine article not some rip-off copy made from substandard materials.

Application: All Nissans

Price: $95.00

Nismo Thermostats

Description:

Regular thermostat opens at 76 degree C, Nismo thermostat opens at 65 degree C for better cooling. Results in at least 5 degress C lower at Full throttle acceleration. A must for a modified engine.

Application: All SR20's $105.00 (out of stock, more in 3 weeks)
Application: All RB's $115.00

Nismo Big Clutch Slave Cylinder

Description:

These nismo clutch cylinders have a larger piston to create a softer pedal on those heavy and harsh clutches.

These are direct replacement for the standard ones.

Will suit S13/S14/S15 SR20 & CA18

Price: $200

Nismo Clutch Pivot

Description:

When a sports clutch cover or multi-plate clutch set are used, the stress on the release fork and the release pivot which acts as a fulcrum are also increased. In competitive driving and other high-load situations there is the danger of the release pivot failing.

The Reinforced Release Pivot is manufactured of high-quality chromoly steel, providing a 30% increase in strength compared to the standard carbon steel pivot, reducing the chance of failure due to overload. The use of a flat washer instead of standard spring washer also reduces the chance for the release pivot to become loose and fail due to excessive play.

Application: S13, S14 & S15

Price: $60.00

Nismo Shift Stickers

Description:

Brand new genuine nismo shift stickers. A must have for those with aftermarket shift knobs without shift patterns on them. Keep the police happy!

Price: $5.00 each

5spd & 6spd versions available...

Nismo Exhaust Hangers

Description:

Brand new genuine nismo exhaust hangers. A must have for those with aftermarket exhausts. These are stronger than factory and hold your exhaust firm in place.

Price: $25.00 each

Bolt-in Seatrails - Fixed-back & Reclinable For Skyline & Silvia

Tue, 24 Apr 2012 14:20:38 +0000

We just received our latest shipment of direct bolt-in seat rails.

These POWERAILS performance seat rails essentially provide a direct fit solution to all seat installation problems, NO modifying or welding is required! POWERAILS can be fitted on most aftermarket seats such as Recaro, Bride, Sparco, Omp, Sabelt etc.

Our latest order includes all these;

$179 each
RECLINABLE NISSAN SKYLINE R32,R33,R34 DRIVERS SIDE
RECLINABLE NISSAN SKYLINE R32,R33,R34 PASSENGERS SIDE
RECLINABLE NISSAN SILVIA S13,S14,S15 DRIVERS SIDE
RECLINABLE NISSAN SILVIA S13,S14,S15 PASSENGERS SIDE

$189 each
FIXED-BACK NISSAN SKYLINE R32,R33,R34 DRIVERS SIDE
FIXED-BACK NISSAN SKYLINE R32,R33,R34 PASSENGERS SIDE
FIXED-BACK NISSAN SILVIA S13,S14,S15 DRIVERS SIDE
FIXED-BACK NISSAN SILVIA S13,S14,S15 PASSENGERS SIDE

Check them out on our website here - http://www.grizzlyim...y&path=59_65_79

Any questions PM us here or email sales@grizzlyimports.com.au

Stainless Steel Braided Hose & Aluminium Hose Ends/Fittings

Sat, 21 Apr 2012 03:14:28 +0000

Motorsport quality stainless steel braided rubber hose and 100/400 series reusable aluminium hose ends, available in a variety of sizes from AN-4 to AN-10 and suitable for high pressure fuel/oil/water/air. Also available is a large range of aluminium fittings and adapters.

Stainless Braided Rubber Hose AN-4 $20/m

Stainless Braided Rubber Hose AN-6 $22/m

Stainless Braided Rubber Hose AN-8 $26/m

Stainless Braided Rubber Hose AN-10 $30/m

100 Series AN-4 Hose Ends $13-26/each

100 Series AN-6 Hose Ends$15-27/each

100 Series AN-8 Hose Ends$20-37/each

100 Series AN-10 Hose Ends$26-48/each

400 Series Push-On AN-4 Hose Ends$12-22/each

400 Series Push-On AN-6 Hose Ends$14-26/each

400 Series Push-On AN-8 Hose Ends$18-35/each

400 Series Push-On AN-10 Hose Ends$21-44/each

Steel Rims 16x8 16x10 4x114.3 - SOLD OUT

Fri, 20 Apr 2012 13:18:16 +0000

We are currently SOLD OUT of all our steel rims.

New order arriving 10-12 weeks (Sometime in July)

They will still be,

$400 per set
or
$200 per pair

We have put in another order so dont worry if you missed out.

Also please visit our facebook poll and vote for which size you would prefer to see in our next shipment.

Go here -> http://apps.facebook...pid=AB--KCx9NEw

Some examples of the bare rims on a S13.

16x8

16x10

JDM S15 Wrecking - Lots of aftermarket parts Engine, 5 Stud, Aero +

Wed, 18 Apr 2012 02:17:33 +0000

Hey guys,
Our S15 has been packed and is around 4 weeks away. It is coming over as a front cut and parts so we don't have all the small parts but will do our best

We are taking deposits of 50% on the parts listed below, ask if there is any other part you need.

Please supply your post code and suburb if you need a freight quote.

Engine with HKS Ex manifold , Chipped ECU , VG30 AFM , braided turbo lines $3,800.00
6 Speed Gearbox $990.00
Manual conversion pedals / cylinders / lines $330.00
Full Roll cage with all mounting hardware $880.00
Complete rear end - Diff Nismo Mechanical $1,250.00
Cusco Coil Overs set 4 $880.00
Bride seats with rails Pair $1,320.00
~~Roof spoiler $165.00~~
~~Boot Spoiler with bootlid $330.00~~
Front uprights with hubs / brakes / lower arms $660.00
LH Door $330.00
~~Tail Lights Pair Yashio Factory ? $280.00~~
HKS Oil Cooler with remote Filter $550.00
HKS Radiator - Seems ok to be checked $440.00
Momo Wheel / Boss kit $220.00
Complete Stainless Exhaust inc Cat / engine pipe $550.00
Steering Rack $280.00
Engine Catch can Radiator mounted $150.00
Rear widebody guards $220.00

Bonnet, headlights , front gurds , RH door not for sale

Pics are available on facebook https://www.facebook...42868526&type=1
Photobucket http://s1187.photobu...ion1garage/S15/

Only the BEST setups here - 1000cc/2000cc BOSCH/ID fuel rail kits, FULL RACE manifolds, award winning Siemens + Zeitronix, UN1CAMS best overall cams, Aussie made gearbox conversions + $1 bargains!

Thu, 12 Apr 2012 06:40:20 +0000

About Us

ALPHA OMEGA Parts and Services is a high performance parts designer, developer and manufacturer.

We are a specialist group of certified automotive engineers and experienced industry experts who will bring you new technology and exciting products for your racing needs and street modifying enjoyment including drift, drag, circuit, motorkhana, hillclimbs, skidpans, supersprint and time attack.

ALPHA OMEGA Parts and Services is proudly made and owned in Australia, supporting local forums, local clubs and local businesses. If you have any suggestions, would like to propose sponsorship, interested in wholesale or want to organise a group buy, we'll be happy to hear from you. Please feel free to Contact Us.

---

(Pre-order bargain available for this...)
FUELING: Top Feed 1000cc and 2000cc Kits (Bosch/Injector Dynamics)

We are still taking pre-release orders on our new top feed Fuel Rail Kits for our favourite car the Nissan Silvia/200sx. Engineered and made right here in Sydney Australia we have both 1000cc and 2000cc kits available to suit the s14 and s15’s standard intake manifold - No manifold spacers!

This is perfect for those that are looking for more power whilst keeping the low/mid range power the standard manifold is known for, and for those going to E85/eFlex ethanol fuels.
For more info on the top feel Fuel Rail Kits please see our website: http://www.ao-ps.com/fuelrail.php

Contact Us for pre-order special pricing.
(Pre-orders manufacturing has been delayed and will we will stop accepting pre-oders once we have our hands on the raw billet materials)

---

FUELING: Ethanol Sensors (Siemens) and Digital Display (Zeitronix)

We are pro dealers of the award winning Zeitronix products. Just arrived we have the Ethanol Content Analyzer kits. This product uses the genuine Siemens ethanol content sensor which is OEM factory fitted to eFlex/e85/ethanol cars. Combined with the Zeitronix analyzer and wiring kit you can now see the exact percentage of ethanol your car is running in real time and it can also 'talk' to your ECU to run ANY mix of ethanol - 0%, 38%, 82%, 100%!

For more info on the Zeitronix ethanol please see our website: http://www.ao-ps.com/zeitronix.php

---

ENGINE: Camshafts (UN1CAMS)

From what many have seen and some have experienced they are the newest and best overall/area under the curve set of camshafts available for our much loved SR20DET. These are a great match for engines pushing up to 350rwkw if you want a responsive setup. It’s pricey because it’s Australian made and Australian engineered but well worth the gains over anything else we’ve seen – which is why we only carry UN1CAMS.

For more info on the UN1CAMS please see our website: http://www.ao-ps.com/camshafts.php

---

ENGINE: Exhaust Manifolds (Full Race)

We are Australian pro dealers for the awesome FULL RACE range of manifolds and associated parts. Just arrived we have the SR20DET twin scroll and twin wastegate, highmount T3 manifold. Still sitting on the workbench so we’ll get some better pics later.

These are thickwall “stainless steampipe” manifolds with robotic TIG welding for flawless welds guaranteed never to crack. Made in USA. This is the best of the best, hands down. In stock now.

---

ENGINE: Wastegates (TiAL)

Also stocking TiAL wastegates...

---

DRIVETRAIN: Gearboxes (Z32GCK)

VERSION 2 of our Z32 gearbox conversion kits now available, which feature re-engineered components, revised tolerances, new jigs, individual hand finishing and inspection and sharper pricing!
For more info on the Z32GCK please see our website and select your car: http://www.ao-ps.com

---

KEEP UP TO DATE WITH US:

We’re now on Facebook: http://www.facebook....artsandservices
We’re now on Twitter: https://twitter.com/.../alphaomega_aus
We now blog on the homepage: http://www.ao-ps.com

---

WHO WE SPONSOR:

We sponsor the Sydney Children's Hospital Foundation.
We sponsor the Breast Cancer Network Australia.
We sponsored charity runners in the City2Surf 2011.
We will sponsor charity runners in the City2Surf 2012.

---

***BARGAIN CENTRAL BARGAIN CENTRAL BARGAIN CENTRAL***

Tomei DURACON Shift/Gear Knobs!

Two styles to choose from: long or short.
Thread is M10x1.25 which will fit most 5 speed Nissan gearboxes including Z32 gearboxes.
Normal price: $85
Bargain central price: $49.99 + ship
VERY limited stock, but in stock now.

---

$1nr SALE!!

Yes better value than Maccas!

We have a few bits and pieces lying around that are good to keep around as spare parts but we need the space/clearing out stuff, and it's better than throwing it in the bin if someone else can make use of it.
Especially like the SR20 5 speed gearbox that's worth over $500, starting at only $1

Grab a bargain and have some fun bidding on eBay:
http://www.ebay.com....sid=p4340.l2562

Don’t like bidding? Feel free to browse what’s available and make an offer.

---

Contact Us

ALPHA OMEGA Parts and Services
ABN: 41 428 551 300
Phone: (02) 8090 0686
International: +612 8090 0686
Mailing address: PO Box 208, Chester Hill, NSW, 2162
E-mail (General): contactus ''*at*'' ao-ps.com
E-mail (Sales): sales ''*at*'' ao-ps.com
Website: www.ao-ps.com

Why buy China? SPL PRO SUSPENSION PARTS - 100% made in the USA!

Wed, 11 Apr 2012 01:07:32 +0000

JDM Obsession Pty Ltd is proud to announce that we are the sole authorised distributor for SPL Pro Suspension Parts in Australia.

SPL Pro Suspension Parts are unrivalled in their quality, setting the standard worldwide for aftermarket suspension arms. We have the full range of SPL Pro Suspension products available, including camber arms, traction rods, toe arms, tension (caster) rods, tie rods, tie rod ends, cradle bushes, and much more!

SPL Pro Suspension Parts are wholly unique in the marketplace for the following reasons:

100% designed, engineered, and manufactured in the USA
Incredibly lightweight (yet very strong); featuring titanium components
Full after sales support and warranty
In-house research and development

With so many suspension arms on the market today, why should you choose SPL Pro Suspension Parts from JDM Obsession? Well, it's quite simple! You should buy SPL Pro Suspension Parts if you want a motorsport-proven, high quality product. SPL Pro Suspension Parts are not designed to compete with the cheap rubbish coming into the country from Taiwan and China. We understand the need for very high quality products to cope with the demands of circuit racing and drifting.

Before you purchase aftermarket suspension arms, we invite you to compare SPL Pro Suspension Parts to the competition! Ask yourself the following:

Do you really want to put the safety of yourself and others at risk in the pursuit of saving a few dollars?
Do you really want to go to the hassle of replacing the arms after only a short period of use when the cheap bearings are flogged out?
Can the seller be trusted to provide full after sales support, if required?
Does the brand I'm purchasing have a track record of successful use in competitive motorsport?
Is the brand that I'm purchasing a generic item from a mass production factory in Taiwan, Korea, or China, which merely has the seller's logo on it?
Am I supporting innovation, product development, or motorsport testing by purchasing this product?

S13 Silvia/180SX

SPL TITANIUM Tension Rods - $249

SPL TITANIUM Rear Camber Arms - $349

SPL TITANIUM Rear Traction Rods - $239

SPL TITANIUM Rear Toe Rods - $289

SPL Brake Cooling Deflectors - $59

SPL V5 Tie Rod Ends - $229

SPL Titanium HICAS Eliminator - $489

SPL FKS Rear Knuckle Monoball Bushings - $369

SPL Eccentric Lockout Kit - $69

SPL SOLID Subframe Bushings - $189

SPL SOLID Subframe Conversion Bushings (S14/S15 Subframe in S13) - $219

SPL SOLID Differential Mounting Bushings - $95

S14/S15 200SX (Silvia)

SPL TITANIUM Tension Rods - $249

SPL TITANIUM Rear Camber Arms - $349

SPL TITANIUM Rear Traction Rods - $239

SPL TITANIUM Rear Toe Rods - $289

SPL Brake Cooling Deflectors - $59

SPL V5 Tie Rod Ends - $229

SPL FKS Rear Knuckle Monoball Bushings - $369

SPL Eccentric Lockout Kit - $69

SPL SOLID Subframe Bushings - $189

SPL SOLID Differential Mounting Bushings - $119

Z32 300ZX

SPL TITANIUM Tension Rods - $249

SPL TITANIUM Rear Camber Arms - $349

SPL TITANIUM Rear Traction Rods - $239

SPL TITANIUM Rear Toe Rods - $289

SPL Brake Cooling Deflectors - $59

SPL V5 Tie Rod Ends - $245

SPL Titanium HICAS Eliminator - $489

SPL FKS Rear Knuckle Monoball Bushings (NON HICAS) - $469

SPL FKS Rear Knuckle Monoball Bushings (HICAS) - $359

SPL Rear Knuckle Shock Mount Bushings - $119

SPL Eccentric Lockout Kit - $69

SPL SOLID Subframe Bushings - $199

SPL SOLID Differential Mounting Bushings - $119

SPL PRO Front Endlinks - $189

Z33 350Z

SPL PRO V3 Front Upper Arms - $769

SPL FKS Front Compression Rod Bushings - $179

SPL Front Lower Arm Inner Bushings - $129

SPL Front Lower Arm Shock Bushings - $129

SPL TITANIUM Camber Links - $299

SPL TITANIUM Rear Mid Links - $799

SPL TITANIUM Rear Toe Arms - $310

SPL TITANIUM Rear Traction Rods - $339

SPL FKS Rear Knuckle Monoball Bushings - $549

SPL Eccentric Lockout Kit - $69

SPL SOLID Differential Mounting Bushings - $159

SPL PRO Front Endlinks - $189

SPL PRO Rear Endlinks - $189

ITEMS FOR Z34, R35, V35, and V36 TO BE ADDED SOON.

Please PM or email [email=""]sales@jdmobsession.net[/email] with any enquiries. Most items in stock in Sydney, ready to go!

WHY BUY FROM OVERSEAS? Our prices are cheaper than what you would usually pay to buy SPL Pro Suspension Parts from the USA when shipping, taxes, and duties are taken into account. However, if you do manage to find a cheaper price, let us know and we will do our best to BEAT IT - that's the JDM OBSESSION PRICE PROMISE!

CHEAPEST WHEELS! Enkei, XXR, Work Wheels, Rays, Advan, etc

Wed, 11 Apr 2012 00:52:15 +0000

Hi guys,

PAY FULL PRICE NO MORE!!

Now you can count on me for all wheels brands listed above.
We will bring you the cheapest price for them.

FORGET WAITING RIMS FOR MONTHS,
WE WILL SEND YOU THE WHEELS WHEN YOU NEED THEM!!

Please send us all the inquiries and we will get back to you within minutes:
- PM
- Email to cheap.wheels.direct@gmail.com
- SMS 0433552745

Enkei

*PLEASE PM US FOR ENKEI PRICES*
*WE ARE SIMPLY THE CHEAPEST FOR ALL ENKEI RANGE, NO ONE WILL PRICE MATCH US*
CLICK HERE FOR FULL LIST OF ENKEI WHEELS, WE CAN BRING YOU ALL OF THEM!!

RPF1
Available sizes
click here

NT03+M
Available sizes
click here

PF01
Available sizes
click here

GTC01
Available sizes
click here

RP03
Available sizes
http://www.enkei.com..._large_350z.jpg

Enkei92
Available sizes
click here

XXR

XXR527
Available sizes
15x8.25 +0 [Flat black, Chromium Black, Gold] 4x100/114.3 multistud $820 delivered
16x8.25 +0 [Flat black, Chromium Black, Gold] 4x100/114.3 multistud $880 delivered
17x8.25 +35 [Flat black, Chromium Black, Gold] 4x100/114.3 multistud $950 delivered
17x8.25 +25 [Flat black, Chromium Black, Gold] 5x100/114.3 multistud $950 delivered
17x8.25 +35 [Flat black, Chromium Black, Gold] 5x100/114.3 multistud $950 delivered
17x9.75 +25 [Flat black, Chromium Black, Gold] 4x100/114.3 multistud $980 delivered
17x9.75 +25 [Flat black, Chromium Black, Gold] 5x100/114.3 multistud $980 delivered
18x8.75 +20 [Flat black, Chromium Black, Gold] 5x100/114.3 multistud $1050 delivered
18x9.75 +35 [Flat black, Chromium Black, Gold] 5x100/114.3 multistud $1050 delivered
18x9.75 +20 [Flat black, Chromium Black, Gold] 5x100/114.3 multistud $1080 delivered

XXR526
Available sizes
17x9 +35 2.75 inch dish [Gloss black, Chromium black] 4x100/114.3 multistuds
17x9 +35 2.75 inch dish [Gloss black, Chromium black] 5x100/114.3 multistuds
17x9 +25 2.75 inch dish [Gloss black, Chromium black] 5x100/114.3 multistuds
17x10 +20 4.25 inch dish [Gloss black, Chromium black] 4x100/114.3 multistuds
17x10 +20 4.25 inch dish [Gloss black, Chromium black] 5x100/114.3 multistuds
18x9 +35 2.75 inch dish [Gloss black, Chromium black] 5x114.3/120 multistuds
18x9 +25 2.75 inch dish [Gloss black, Chromium black] 5x114.3/120 multistuds
18x10.5 +25 4.25 inch dish [Gloss black, Chromium black] 5x114.3/120 multistuds
20x9 +35 3.25 inch dish [Gloss black, Chromium black] 5x114.3/120 multistuds
20x9 +15 3.25 inch dish [Gloss black, Chromium black] 5x114.3/120 multistuds
20x10.5 +15 5.25 inch dish [Gloss black, Chromium black] 5x114.3/120 multistuds

XXR521
Available sizes
18x8.5 +35 [Flat black, Flat gunmetal, Gloss black w/ polished lips] 5x114.3/120 $1200 delivered
18x8.5 +25 [Flat black, Flat gunmetal, Gloss black w/ polished lips] 5x114.3/120 $1200 delivered
18x10 +25 [Flat black, Flat gunmetal, Gloss black w/ polished lips] 5x114.3/120 $1250 delivered
20x8.5 +32 [Flat black, Flat gunmetal, Gloss black w/ polished lips] 5x114.3/120 $1380 delivered
20x10 +32 [Flat black, Flat gunmetal, Gloss black w/ polished lips] 5x114.3/120 $1400 delivered

XXR522
Available sizes
15x7 +25 [Flat black, Chromium Black, Gold] 4x100/114.3 multistud $820 delivered
15x8 +0 [Flat black, Chromium Black, Gold] 4x100/114.3 multistud $820 delivered
16x7 +25 [Flat black, Chromium Black, Gold] 4x100/114.3 multistud $880 delivered
16x8 +0 [Flat black, Chromium Black, Gold] 4x100/114.3 multistud $880 delivered
17x9 +25 [Flat black, Chromium Black, Gold] 5x114.3/120 multistud $980 delivered
18x8.5 +30 [Flat black, Chromium Black, Gold] 5x114.3/120 multistud $1050 delivered
18x9.5 +25 [Flat black, Chromium Black, Gold] 5x114.3/120 multistud $1080 delivered
19x8.5 +38 [Flat black, Chromium Black, Gold] 5x114.3/120 multistud $1280 delivered
19x8.5 +15 [Flat black, Chromium Black, Gold] 5x114.3/120 multistud $1280 delivered
19x10 +42 [Flat black, Chromium Black, Gold] 5x114.3/120 multistud $1320 delivered
19x10 +20 [Flat black, Chromium Black, Gold] 5x114.3/120 multistud $1320 delivered

WORK WHEELS
CLICK HERE FOR FULL LIST OF WORK WHEELS, WE CAN BRING YOU ALL OF THEM!!

RAYS
CLICK HERE FOR FULL LIST OF RAYS WHEELS, WE CAN BRING YOU ALL OF THEM!!

ADVAN
CLICK HERE FOR FULL LIST OF ADVAN WHEELS, WE CAN BRING YOU ALL OF THEM!!

GREDDY EXHAUST
CLICK HERE FOR FULL LIST OF GREDDY EXHAUST, WE CAN BRING YOU ALL OF THEM!!

kempO power brace

Sun, 08 Apr 2012 01:22:22 +0000

The kempO Power Brace provides increased strength & rigidity to the vehicle chassis by using a tension rod bracket at both left & right sides with a bar as a joint. This improves chassis performance in circuit & hard driving at slalom curves & frequent change in vehicle directions. As the kempO Power Brace do not protude out, or alter the stock mounting locations, it will maintain the same height as the before installation

$150

also offer fender braces for
$150 a pair

RAYS 57 GAINER LIMITED EDITION - FULL MATT BLACK "AUTOTECHNIK LIMITED EDITION"

Thu, 05 Apr 2012 01:14:31 +0000

All,

We have just received a shipment of these limited Edition RAYS 57 GAINER in Full Matt Black.

These were produced by RAYS Japan in Matt Black only for Autotechnik.

Limited quantities available.

These are not available anywhere else.

SPECIFICATION

Size: 18 x 9,5 +22
Pcd: 5 x 114.3

Price: $1999 + delivery

Please contact us regarding delivery cost.

S13 ROCKET BUNNY PRE BUY, and all our other kits on special!

Wed, 04 Apr 2012 13:26:12 +0000

We have just finished our S13 ROCKET BUNNY kits, they include front bar, side skirts, rear bar, front fenders, rear fenders, and the rear spoiler

THESE ARE NOT GENUINE, AND WE ARE MAKING THEM OURSELVES.

The RRP for the total package will be $2250, the group buy / pre order price is $1800 and will be valid until the end of APRIL.

the stock will be here hopefully by the end of may, if not then early june.

S14 AND 180SX ARE UNDER WAY, I EXPECT THEM TO BE READY AND IN STOCK IN 3-4 MONTHS

i am also offering the following at special prices for this month only!!

Some styles are in stock and some are made to order, which we usually allow anywhere from a week to 2 weeks depending on how busy we are.

AUSTRALIA WIDE, INSURED FREIGHT IS AVAILABLE.

180SX

WORKS9 STYLE $770 NOW $600

URAS STYLE $660 NOW $550

S13

SUPERMADE STYLE $770 NOW $600

WORKS9 STYLE $770 NOW $600

BN SPORTS STYLE $660 NOW $600

BN BLISTER $1200 NOW $900

NISMO STYLE BONNET $600 NOW $500 (AVAILABLE IN FRP ONLY, CF PICTURED)

S14/A

SUPERMADE $770 NOW $700

WORKS9 $770 NOW $700

S15

SUPERMADE $770 NOW $700

GP SPORTS G SONIC EVOLUTION WIDEBODY $2500 NOW $2000 (2 ONLY) BE THE FIRST IN AUSTRALIA WITH THIS KIT!!!!

VERTEX LANG STYLE $1200 (FB/SS/RB)
INCL. CANARDS & BOOTLIP $1500
MADE TO ORDER

VERTEX RIDGE STYLE $2300
MADE TO ORDER

R32 GTR

VEILSIDE WIDE FENDER KIT $1600

AE86 LEVIN

DMAX STYLE $770 NOW $660

DMAX D1 FRONT FENDERS $400 NOW $300

FK 30MM REAR FENDERS $40 NOW $300

ORIGIN STYLE $700 NOW $600

Tomei Poncam camshaft for nissan car - special offer this months

Wed, 04 Apr 2012 05:00:48 +0000

Special offer this monthis for tomei poncam or procam

Tomei camshaft Poncam : sr20 s13 s14 s15
143043-Silvia SR20DET (S13)-$565+shipping
IN256 EX256 11.5 LIFT
14344- Silvia SR20DET (S14/15)-$565+shipping
IN256 EX256 11.5 LIFT
Tomei camshaft Poncam : sr20 s13 s14 s15
143043custom -Silvia SR20DET (S13)-$565+shipping
IN270 EX270 11.5 LIFT
14344-custom Silvia SR20DET (S14/15)-$565+shipping
IN270EX270 11.5 LIFT

Silvia SR20DET (S13 s14/s15)-$565+shipping
IN260 EX260 12.0 LIFT
Silvia SR20DET (S13/s14/s15)-$565+shipping
IN270 EX270 12.5 LIFT
143043-Silvia SR20DET (S13/s14/s15)-$565+shipping
IN280 EX280 12.5 LIFT

Tomei camshaft Poncam -nissan skyline rb20 /25 26
143019-Skyline RB20DET HCR32GTST -$769+shipping
IN256 EX256 8.5 LIFT
-Skyline RB20DET HCR32GTST -$769+shipping
IN260 EX260 10.25 LIFT
Skyline RB20DET HCR32GTST -$769+shipping
IN270 EX270 10.25 LIFT

143020-Skyline RB25DET ECR33GTST before 97 )-$769+shipping
IN256 EX256 8.5 LIFT
143050-Skyline RB25DET ECR33GTST after 97 )-$769+shipping
IN256 EX256 8.5 LIFT
143021-Skyline RB25DET ECR33GTST before 97 )-$769+shipping
IN264 EX264 8.5 LIFT
143051-Skyline RB25DET ECR33GTST after 97 )-$769+shipping
IN264 EX264 8.5 LIFT

143023-Skyline RB25DET (ER34GTST)-$$769+ shipping
IN260 EX 260 9.15 LIFT
143024-Skyline RB25DET (ER34GTST)-$$769+ shipping
IN270 EX 270 9.15 LIFT
143005 -Skyline RB26dett r32/33 gtr-$769+shipping
IN260 EX260 9.15 LIFT
143006 -Skyline RB26dett r32/33 gtr-$769+shipping
IN270 EX270 9.15 LIFT
143018 -Skyline RB26dett r34 gtr-$769+shipping
IN260 EX260 9.15 LIFT
143018 custom -Skyline RB26dett r34 gtr-$769+shipping
IN270 EX270 9.15 LIFT

Tomei Cam gear sr20 in and ex - $469 shipped
Tomei cam gear rb20/25 26 in and ex $375 shipped

Attached Thumbnails

CRAZY ISC ADJUSTABLE SUSPENSION ARM SALE!

Mon, 02 Apr 2012 06:55:57 +0000

Package 1 = $425 (normally $517)
Adjustable rear camber
Adjustable rear traction
Adjustable rear toe

Package 2 = $499 (normally $676)
Adjustable rear camber
Adjustable rear traction
Adjustable rear toe
Adjustable stabiliser bar

Package 3 = $349 (normally $437)
Adjustable rear camber
Adjustable rear traction
Adjustable rear hicas

Package 4 = $699 (normally $875)
Adjustable rear camber
Adjustable rear toe
Adjustable rear traction
Adjustable stabiliser bar
Adjustable front castor

20% off the following items!!

Adjustable rear camber = $179
Adjustable rear toe = $179
Adjustable rear traction = $159
Adjustable rear stabiliser = $159
Hicas lock bar = $99
Adjustable front castor = $199
Alloy subframe spacers = $125
R32 front adjustable camber = $349
R33/R34 front adjustable camber = $399
Silvia front adjustable LCA = $399
Silvia rear adjustable LCA = $449
350z adjustable rear toe = $199
350z adjustable rear camber = $199
silvia strengthened tie rod kit = $199
PU silvia engine mounts = $125
PU silvia gearbox mounts = $125
PU silvia engine and g/box mounts = $225
Hydraulic handbrakes = $249

For pictures and a brief description please visit :
http://www.isc-coilovers.com

ISC N1 coilovers reduced to $1199! 32 step damper adjust, base height adjust, 2 way camber adjust, local warranty

Mon, 02 Apr 2012 06:50:26 +0000

Attached Thumbnails

HFM 6 Point Roll Cage to Suit S13, S14, S15,180SX - Metallic Blue Finish - only $660

Thu, 29 Mar 2012 09:22:10 +0000

HFM 6 Point Roll Cages to Suiting S13, S14, S15,180SX - Metallic Blue Finish

Seats around Dash. Material Mild Steel, 40mm OD, 2mm Thick, Total Weight 15kg

Everything for Installation is Included:
Bolts
Nuts

They Do Meet VicDrift Regulations

Click Here to Check Them Out!

Warehouse Pricing Skid Tyres! Brand new 18" tyres from $100, 17's from $80

Wed, 28 Mar 2012 03:43:40 +0000

Hey Everyone,

We are new to hardtuned, but have been around in the Tyre game for a long time!

Given our buying power we can bring you some of the cheapest pricing available

We are based on the Gold Coast a can offer free delivery locally, or $20 per tyre anywhere in Australia!

**ALL TYRES AND PRICING IS SUBJECT TO AVAILABILITY**

Brands we stock :
Pirelli, Good Year, Continental, Maxxis, Federal, Kuhmo, Hero, Sumitomo, Rotalla, Adrenza, Bonanza, Wanli, Delinte & More!!

If your looking for the best price on a specific brand / size then just call or reply to this message!

Below are a few of cheaper tyres we have Available, but we will be updating the list over the next couple of weeks!

Please call, TXT or email your tyre size if it isn't below for a quote.

SMS TYRES: 0424 529 049

SMS or CALL us for the fastest quotes!

Just a small selection of our tyres:

16"
205/55 R16 91W Rotalla F107 $65
215/60 R16 92H Rotalla F109 $80

17"
205/45 R17 88W Rotalla F107 $80
235/45 R17 97W Rotalla F107 $90
245/45 R17 99W Rotalla F107 $90

18"
215/35 R18 81W Rotalla F107 $100
225/40 R18 92W Rotalla F107 $105
225/45 R18 95W Rotalla F107 $110
235/40 R18 95W Rotalla F107 $110
245/40 R18 91W Rotalla F107 $120
235/50 R18 97W Rotalla F105 $125

19"
235/35 R19 91W Rotalla F105 $130
245/35 R19 93W Rotalla F108 $140

20"
225/30 R20 85W Adrenza AD88 $130
225/35 R20 93W Adrenza AD88 $150
245/35 R20 95W Delinte D7 $140
265/30 R20 114V Adrenza AD99 $165
275/30 R20 97W Adrenza AD88 $175
275/30 R20 117H Adrenza AD99 $190

22"
265/35 R22 102W Delinte D8 $190
295/25 R22 97W Adrenza AD88 $220
305/40 R22 114V Delinte D8 $235

Steel Wheels Round 2 - Offset and Dish New options

Thu, 22 Mar 2012 01:40:50 +0000

Steel wheels are on order! 10% off with 50% deposit for pre orders!!!

15x8 + 0 4x114.3 - wedge - gloss black $99 Pre order - $89
16x8 + 15 4x100 - wedge - gloss black $110 Pre order - $99
16x8 +25 5x120 - 5 spoke - gloss black $110 Pre order - $99
16x10 +25 4x114.3 - wedge - gloss black $120 Pre order - $108
17x9 +10 5x114.3 - 5 spoke - silver $130 Pre order - $117

The wedge design you see is a new look for this order, we have limited this order to 20 of each size and have already taken pre orders. Expected delivery is 8 weeks but this is dependant on a large amount of variables. Deposits will not be refunded for any reason. The options above are the only options, if you prefer another colour, size or any change you will need to order 20 wheels, Group buys welcome if you order at one time.

The wedge wheel is based on this sample.

The pictures below are of the last batch, the 5 Spoke will be the same in the new order.
The options above are the only options, if you prefer another colour, size or any change you will need to order 20 wheels, Group buys welcome if you order at one time.

Kenobi High-Flow Metal Cats & D1 Racing 7570 Alloy Wheel Nuts

Wed, 21 Mar 2012 00:37:36 +0000

The HF100 and HF200 series catalytic converters are made from a full stainless steel construction with integrated heat-shield and a high-flow metallic substrate designed to meet the EURO 3 EPA emission standard. The 100cpsi and 200cpsi metal-cores are the highest flowing available and are both suitable for high power/road/race applications.

Kenobi HF100 Metal-Core 100 CPSI - 2.5 Inch $189
Kenobi HF200 Metal-Core 200 CPSI - 2.5 Inch $169

Kenobi HF100 Metal-Core 100 CPSI - 3 Inch $189
Kenobi HF200 Metal-Core 200 CPSI - 3 Inch $169

Kenobi HF100 Metal-Core 200 CPSI - 3.5 Inch $199

Note: 2.5 and 3 Inch ID models have 11 Inch body length. 3.5 Inch ID model has 10 Inch body length.
All sizes have 4 Inch core diameter, plus external heat shield.

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------

D1 Spec Racing Wheel Nuts are made from a very light and strong material - 7075 grade aluminium alloy - weighing in at just 25g per nut, whilst at the same time they are much stronger and harder than heavy factory steel nuts and even many aftermarket alloy nuts. The material and manufacturing process increases the hardness of the surface to the HV330 specification, which is 33.6% harder/stronger and 62% lighter than standard alloy wheel nuts. These nuts are suitable for street and track racing applications.

Features

- Colour: Black, Red, Blue
- Material: 7075 Aluminium Alloy
- Thread Size 12 x 1.25mm, 12 x 1.5mm
- Socket Size: 19mm
- Length: 50mm
- Weight: 25g
- QTY: 20 piece per set

D1 Spec Racing Wheel Nut Set - 12 x 1.25mm Black $69

D1 Spec Racing Wheel Nut Set - 12 x 1.5mm Black $69

D1 Spec Racing Wheel Nut Set - 12 x 1.25mm Blue $69

D1 Spec Racing Wheel Nut Set - 12 x 1.5mm Blue $69

D1 Spec Racing Wheel Nut Set - 12 x 1.25mm Red $69

D1 Spec Racing Wheel Nut Set - 12 x 1.5mm Red $69

Carbon and FRP accessories and bodykits

Fri, 16 Mar 2012 13:59:05 +0000

We have a whole heap of different carbon and FRP copy items that need to go. Postage Aus wide available. List below is what we have left in stock. Discounts for multiple items! Note: these are copies not genuine bodykits.

Carbon and FRP Accessories

1x 180sx carbon rear hatch - $650
1x 180sx FRP rear hatch - $400
1x S15 Dmax style FRP Roof Spoiler - $190
1x S15 Dmax style Carbon Roof Spoiler - $250
1x S14 carbon Origin style boot lip - $190
4x S14 FRP Origin style boot lip - $130
1x AE86 FRP Duckwing boot spoiler - $190
1x 180sx/S13 carbon door sill - $120
1x S14 carbon door sill - $120
1x S15 carbon door sill - $120
1x 180sx carbon air diverter cooling panel - $170
5x SR20(vct) carbon engine coil cover - $90
1x CA18 carbon engine coil cover - $90
1x Evo-9 carbon cam cover - $110
1x GD WRX carbon air diverter cooling panel - $170
2x GDB wrx carbon front bumper canards - $130
1x Universal Type A (small) Carbon Front Splitters - $120
2x Universal Type A (small) FRP Front Splitters - $90
2x Universal Type B (large) FRP Front Splitters - $90
1x 180sx/S13 carbon driver door trim - $450
1x 180sx/S13 carbon passenger door trim - $450
1x S14 carbon driver door trim - $450
1x S14 carbon passenger door trim - $450
1x S15 carbon driver door trim - $450
1x S15 FRP OEM Boot Lid - $300

Body Kits

1x S14 series 2 Msports style front bar - $200
1x S14 series 2 Msports style rear bar - $200
1x S14 series 1 Msports style rear bar - $200
2x S14 vertex style rear bar - $200
1x S14 series 1 BN style front bar - $200
1x AE86 Levin vertex style front bar - $200
1x AE86 Levin vertex style side skirts - $150
1x AE86 Levin vertex style rear bar - $200
2x S14 D-MAX style +25mm front guards - $260
1x AE86 ORIGIN style Side Skirts - $150
1x AE86 ORIGIN style Rear Bumper - $200
1x 180SX RWS Style Aero Side Skirts - $150
2x 180SX Final Konnexion style +30MM Rear Guards - $220

LATEST DEALS FROM OUR SPONSORS

CHEAPEST WORK MEISTER, VSKF, VS-XX, SSR TYPE F SPECIALS - BACK BY POPULAR DEMAND - UNBEATABLE PRICE - TILL END OF MAY

NISSAN 180SX TYPE X D-MAX 2-1 FRONT BAR INDICATORS

Attached Thumbnails

AME TM-02 - Wheels of World Time Attack "As seen on CyberEvo and JET200"

ENKEI AND MRR WHEELS MADNESS! ALL NEW XXR530 IS HERE! No one beats our prices!

ENKEI RPF1 **CHEAPEST ON THE MARKET GUARANTEED**

koyo alloy radiator -type R 53mm thick-nissan - subaru - mitsubishi - honda - subaru - toyota

POWERTUNE FUEL RAIL KIT

ISC Tube and Fin intercooler kits and 52mm Alloy Radiators!

ISC N1 coilovers reduced to $1199! 32 step damper adjust, base height adjust, 2 way camber adjust, local warranty

Attached Thumbnails

Project Mu - Authorised Dealer! 100% made in Japan brake pads, rotors, calipers + more...

Silicone Hoses - Straight, Reducers, 45 Deg, 90 Deg, 135 Deg, T-Piece, Clamps, Vacuum Hose

Genuine Nissan Parts! + NISMO Parts!

Bolt-in Seatrails - Fixed-back & Reclinable For Skyline & Silvia

Stainless Steel Braided Hose & Aluminium Hose Ends/Fittings

Steel Rims 16x8 16x10 4x114.3 - SOLD OUT

JDM S15 Wrecking - Lots of aftermarket parts Engine, 5 Stud, Aero +

Only the BEST setups here - 1000cc/2000cc BOSCH/ID fuel rail kits, FULL RACE manifolds, award winning Siemens + Zeitronix, UN1CAMS best overall cams, Aussie made gearbox conversions + $1 bargains!

Why buy China? SPL PRO SUSPENSION PARTS - 100% made in the USA!

CHEAPEST WHEELS! Enkei, XXR, Work Wheels, Rays, Advan, etc

kempO power brace

RAYS 57 GAINER LIMITED EDITION - FULL MATT BLACK "AUTOTECHNIK LIMITED EDITION"

S13 ROCKET BUNNY PRE BUY, and all our other kits on special!

Tomei Poncam camshaft for nissan car - special offer this months

Attached Thumbnails

CRAZY ISC ADJUSTABLE SUSPENSION ARM SALE!

ISC N1 coilovers reduced to $1199! 32 step damper adjust, base height adjust, 2 way camber adjust, local warranty

Attached Thumbnails

HFM 6 Point Roll Cage to Suit S13, S14, S15,180SX - Metallic Blue Finish - only $660

Warehouse Pricing Skid Tyres! Brand new 18" tyres from $100, 17's from $80

Steel Wheels Round 2 - Offset and Dish New options

Kenobi High-Flow Metal Cats & D1 Racing 7570 Alloy Wheel Nuts

Carbon and FRP accessories and bodykits

ENKEI RPF1 CHEAPEST ON THE MARKET GUARANTEED